Filter
Top Products
Action
Measure your blood pressure
again and do not move during
the measurement. If this error
message continues to appear,
take the appliance back to your
dealer for repair.
Measure your blood pressure
again and do not move during
the measurement. If this error
message continues to appear,
take the appliance back to your
dealer for repair.
Take the appliance back to
your dealer for repair.
Measure your blood pressure
again and do not move during
the measurement.
Put the cuff around the wrist
correctly and try again.
If this error message continues
to appear, take the appliance
back to your dealer for repair.
Replace both batteries. Use
alkaline, Philips Powerlife or
rechargeable batteries, size
AAA (LR03).
Reason
This message is displayed if you
have moved during the
measurement.
E1 will also appear if the
pressure is higher than 300
mmHg, in that case it will be
followed by immediate auto-
deflation.
This message will appear if one
or more components
malfunction.
This message will appear when
the pressure drops to a level
lower than 40 mmHg (due to
weak signals).
The wristband has not been
put around the wrist correctly.
This message may also appear
in case of a malfunctioning cuff
or pump.
The batteries are almost
empty.
Symbol
E1
E1
E2
EE
Err Cuf
Err Cuf
ENGLISH16
Troubleshooting