Filter
Top Products
ENGLISH 21
4 Remove and clean one set of cutters and
combs at a time.
C 5 Separate the cutter from the comb and
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C 6 Replace the set back into the Razor Head
Assembly so that the ‘wings’ on the comb
fit within the brackets located towards the
center of the Assembly.
The set will only fit into the Razor Head
Assembly if the ‘wings’ are between the brackets.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
7 Repeat the process for the other two sets
of cutters and combs.
8 Replace the frame.
C 9 Press down and turn wheel clockwise until
it locks into place.
10 Replace the Razor Head Assembly back on
razor.
2
1
8892_91_90XLDFUwspanish.qxd 7/7/04 9:44 PM Page 21 (Black plate