Filter
Top Products
C 4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.
Cleaning
C ◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
C 1 The light above faucet symbol will start
blinking after each shave to remind you
that the razor needs to be cleaned (except
when the bottom light burns red).
ENGLISH 17
Cleaning: Razor Heads
The quickest and easiest way to clean the razor
heads and hair chamber is to rinse them after
each use or at least once a week with hot water:
Water from the tap should be on a hot setting,
BUT BE CAREFULTOTEST WATER FIRST SO AS
NOTTO BURNOR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
C ◗ While rinsing razor heads, water may drip out
of the base of razor.This is a normal
occurrence.
1 Always turn razor OFF, unplug from outlet
and remove cord from razor before
cleaning.
C 2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C 3 Clean inside razor heads and hair chamber
by running under hot water.
C 4 Clean outside of Razor Head Assembly by
running under hot water.
ENGLISH16