Filter
Top Products
ENGLISH 21
Replacing the Razor Heads
◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ9 Philips Norelco razor heads only.
Razor head check indication
C ◗ The replacement head indicator light starts
blinking to remind you to check if it’s time to
replace your razor heads to obtain optimal
shaving results.
Storage
◗ Be sure razor is turned off. Remove cord from
outlet and razor before storing in a safe, dry
location where it will not be crushed, banged,
or subject to damage.
◗ Do not wrap cord around razor when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor permanently plugged into
outlet.
◗ Do not place or store razor where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C ◗ Put the Protective Razor Head Cap on razor
to protect heads.
ENGLISH20
Once A Month: Razor Head
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Razor Cleaner, model
RC1776, or rub
bing alcohol) and lubricated with
Philips Norelco Razor Lubricant,
model AL80, or
one drop of mineral oil (in the center of the
head). This helps prevent w
ear of the shaving
heads.
After Each Use: Trimmer
1 Turn razor OFF.
2 Push down spring-release trimmer switch.
C 3 Clean trimmer with the brush every time
you use it.
C 4 Lubricate the trimmer teeth with Philips
Norelco Razor Lubricant (model AL80) or
with one drop of mineral oil every 6
months.
5 Close trimmer by pressing trimmer down.
This r
azor has no other user-serviceable parts.
Any other service should be performed by the
Philips Norelco Service Location.