Filter
Top Products
after turning on your Sonicare. Once the appliance has reached
optimal brushing power (after the 14th brushing), you will no longer
hear the double beep at the beginning of your brushing routine.
B
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
To turn off or reactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 To deactivate Easy-start:
Press and hold the power button for 2 seconds.You will hear 1 beep to
indicate that the Easy-start feature had been deactivated.
4 To reactivate Easy-start:
Press and hold the power button until you hear 2 beeps.This indicates
that the Easy-start feature is active again.
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing
plaque.
The Easy-start feature should be deactivated when Sonicare is used in
clinical trials.
Smartimer\ 2-minute timer
◗ All Sonicare models come with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.After these 2 minutes, your
Sonicare will automatically turn off. If you wish to brush for a
longer period, simply press the power button and another 2-
minute cycle will start.
◗ If you wish to pause or stop brushing during your 2-minute cycle,
press the power button.If you press the power button again, the
Smartimer will resume where you left off.
B
The Smartimer will automatically reset to the beginning of a 2-minute
cycle if:
-brushing is paused for 30 seconds or longer;
- the handle is returned to the charger.
ENGLISH 9