Filter
Top Products
ENGLISH 17
◗ The set will only fit into the Razor Head
Assembly so that the ‘wings’ on the comb fit
within the brackets located towards the
center of the assembly.
◗ Make sure tat the two pointy edges of the
head fit exactly into the recesses.
7 Repeat the process for the other two sets
of cutters and combs.
8 Replace the frame.
C 9 Press down (1) and turn wheel clockwise
(2) until it locks into place.
10 Replace the Razor Head Assembly back on
razor.
◗ If the razor heads have been properly
inserted, a shiny circle is visible in the middle
of the razor head assembly.
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, Model RC 1776, or
alcohol) and lubricated with Norelco Razor
Lubricant, model AL80, or one drop of mineral oil
(in the center of the head).This helps prevent
wear of the shaving heads.
7610_16_17.qxd 6/6/05 12:39 PM Page 17 (Zwart plate)