Filter
Top Products
Once A Month: Razor Heads
◗ Do not mix up the cutters and combs as the
shaving persormance may be adversely
affected for several weeks before optimal
shaving performance is restored.
1 Turn razor OFF,remove the charging plug
from the outlet and cord from the razor.
C 2 Press the razor head release button (1),
open andliftoff therazor headassembly (2).
C 3 Turn the center wheel counterclockwise
(1) and remove the retaining frame (2).
4 Remove and clean one set of cutters and
combs at a time.
C 5 Separate the cutter from the comb and
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C 6 Replace the set back into the Head
Assembly so that the ‘wings’ on the comb
fit within the brackets located towards the
center of the assembly.
ENGLISH16
7610_16_17.qxd 6/6/05 12:39 PM Page 16 (Zwart plate)