Filter
Top Products
11.
10.
Do not clean the razor heads with the brush.
Do not clean more than one cutter and head at a time,
since they are all matching sets.If you accidentally
interchange the cutters and heads,it could take several
weeks before optimal shaving performance is restored.
6 Replace the set back into the Head Assembly in such a
way that the sides with the little holes point to the
middle of the shaving unit.
Make sure that the two pointy edges of the head fit exactly
into the recesses.
7 Repeat the process for the other two sets of razor heads.
8 Replace the frame.
9 Press down and turn wheel clockwise until it locks into
place.
10 Replace the Razor Head Assembly back on razor.
If the razor heads have been properly inserted,a shiny
circle is visible in the middle of the razor head assembly.
CLEANING
Once A Month:Razor Heads
For optimum performance, razor cutters and combs
should be cleaned in a degreasing liquid (e. g.Norelco
Razor Cleaner, model RC1776,or alcohol) and lubricated
with Norelco Razor Lubricant,model AL80,or one drop
of mineral oil ( in the center of the head).
Every Six Months:Trimmer
1 Turn razor OFF.
2 Push Trimmer Slide Switch up to pop up Trimmer.
3 Clean Trimmer with the brush.
4 Lubricate the Trimmer teeth with Norelco Razor
Lubricant (model AL80) or with one drop of mineral oil.
5 Close Trimmer by sliding Trimmer switch down.