Filter
Top Products
6.
1 Connect cord to razor.Plug into any 120V to 240V AC/DC
outlet.Use only the cord provided. The light in the
display will come on,the plug and minutes indicator
symbols will blink.Then,“Minutes Left” numbers will
appear on the display and gradually increase.
An adaptor plug may be necessary for cord usage in some
foreign countries.Your new razor will automatically
convert internally to work on 100V to 240V AC/DC
Systems.
Do not charge razor in pouch.
2 First time charging and recharging after non-use for
1 month or more requires a full 4 hours.
When batteries are fully charged,“FULL” scrolls across
the display and light in the display will blink.
Recharging
1 First time charging requires 4 hours.After initial charge,
recharging requires approximately 1 hour.
2 Disconnect the cord.Do not keep razor permanently
plugged into outlet.
Quick Charge
When batteries are totally depleted, recharging the razor
for approximately 6 minutes gives enough energy for a
3 minute cordless shave.
PUT IT TOTHE TEST & SHAVING TIPS
21 DayTrial and Conversion Process.
It is a fact that your skin and beard need time to adjust to
a new shaving system.
Use your new razor exclusively for 3 weeks to fully enjoy
the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to adjust.
Invest 3 weeks and you'll soon experience the full joy of
your new razor.
7.
* Stick with it! If you alternate shaving methods during
the adjustment period,it may make it more difficult to
adapt to the Norelco shaving system.
If you are still not convinced after 21 days,Norelco will
refund you the full purchase price, guaranteed.
Shaving with a clean,dry face gives the best results.
1 Turn razor ON.Shave against the direction of beard
growth using both straight and circular movements.
2 Stretch your skin with your free hand so blades can lift
and cut whiskers. Gently press razor to skin,so the
floating heads can follow the contours of your face.
DO NOT press too hard. Too much pressure can pinch
the skin into the combs.
3 Turn razor OFF.
4 Put the protective razor head cap on the razor to
protect razor heads.
Replace Quadra Action razor heads (model # HQ6)
once a year for optimal shaving results.
To groom sideburns and moustache:
1 Turn razor ON.
2 Push up Trimmer Slide Switch.
The Trimmer can be activated while the razor is running.
HOWTO SHAVE WITH AN ELECTRIC RAZOR
TRIMMING