Philips 6853XL Electric Shaver User Manual


 
11ENGLISH10 ENGLISH
Recharge razor only when the red light is ON
and starts blinking.
Do not recharge razor in pouch.
C 1 Connect cord to razor.
Plug into any 120V to 240V AC outlet. Use only
the cord provided.The green LED Light will light
up and stay lit to indicate razor is charging.
An adaptor plug may be necessary for cord
usage in some foreign countries. Use an
attachment plug adaptor of the proper
configuration for power outlet.
Your new razor will automatically convert
internally to work on 100V to 240V AC systems.
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours.
When batteries have been fully charged, the
green LED light will blink.
Recharging (after initial 4 hour charge)
requires approximately 1 hour.
Quick Charge
When batteries are totally depleted,
recharging the razor for approximately 6
minutes gives enough power for a 3 minute
cordless shave.
Indications
C Low Battery Indicator
If the batteries run low, the red indicator light
will turn on while shaving.After razor has
been switched OFF, the red indicator light will
blink for 4 seconds.
C Charging Indicator
When you charge razor, the green LED light
will light up and stay lit to indicate razor is
charging.
C Full Charge Indicator
When the batteries have been fully charged,
the green LED light will blink.
Charging
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures
below 40°F and higher than 95°F adversely
affects lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the cord provided.
This razor will not recharge while being used
corded.
If razor has not been used for at least 1 month,
razor must be recharged for a full 4 hours.