Philips 6756 X Electric Shaver User Manual


 
Important
C
Only use the power plug and the charging stand
provided to charge the razor.
The power plug transforms 100-240 AC volts
to 12 volts DC.
An adaptor plug may be necessary for cord
usage in some foreign countries.Your new razor
will automatically convert internally to work on
100V to 240V AC/DC systems.
LED Charging Indications
As soon as you start charging the razor, the
green charging indicator light will go on.
When the batteries have been fully charged,
the green charging indicator light will start
blinking.
The red recharging indicator light will blink
when batteries are almost empty.
The red recharging indicator light will blink a
few times after the razor has been switched off.
Charging
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Battery Performance is best if you recharge
only when batteries are (almost) completely
empty.
Do not charge razor in pouch.
1 Connect the small plug into the charging
stand and put the power plug into any
ENGLISH10
6756X B_W new DFU 9/12/03 5:25 PM Page 10 (Black plate)