Filter
Top Products
C
3 Slide the cartridge with the connector in
place into the razor. It only fits properly if
the white side of the connector is pointing
upwards. Close the cover.
4 Press the applicator button a few times
until the Nivea for Men shaving lotion or
gel appears in the small hole located on
razor head assembly.The razor is now
ready for use.
Replacing Cartridges
1 Open back cover of razor.
2 Remove empty cartridge, pull out and save
the connector. DO NOT discard the
connector.
3 Rinse out cartridge compartment with
water before replacing cartridge.Air dry
thoroughly.
4 Insert connector into the plastic cap of
new cartridge until it clicks into position.
5 Follow steps 2-4 for “Inserting the First
Cartridge.”
Use only Norelco Advantage Nivea for
Men shaving lotion (HQ160) or gel
(HQ161) cartridges with this razor.
Do not throw the connector away when you
replace an empty cartridge.You will need to use
the same connector for the other cartridges.
ENGLISH12
6756X B_W new DFU 9/12/03 5:25 PM Page 12 (Black plate)