Filter
Top Products
6 Cutter should be held with cutters facing up
and brushed in an upward motion (Fig. 14).
Clean razor comb with long bristles of brush
in a circular motion.
7 For consistently close and comfortable shaves,
razor heads should be cleaned and lubricated
every 4 weeks. Clean heads in a degreasing
liquid or alcohol.
8 While holding Razor Head Assembly in one
hand, gently place one cutter/comb back into
Assembly (Fig. 15).
9 Repeat procedure for other two cutting heads.
10 Replace frame back into Razor Head Assembly.
While pressing down, turn wheel clockwise to
lock frame into place (Fig. 16).
11 Press Razor Head assembly back on razor housing.
12 Spread Norelco Razor Lubricant, model AL80, or
one drop of mineral oil over floating heads with
your finger.
Charging Base & Pouch
1 The charging base can be placed on countertop.
You may clean the charging base using a
damp cloth.
2 The pouch stores the razor and two spare
cartridges.The pouch can be washed, see washing
instructions inside pouch before cleaning.
14
15
16
10.