Filter
Top Products
7. CLEANING INSTRUC-
TIONS (CONT.)
7A. ONCE A WEEK
1 . Clean Razor Head Assem-
bly as shown (Fig. 6).
2. Press Razor Head Re-
lease Button and lift
Razor Head Assembly
using thumb and index
finger to remove from
razor housing (Fig. 7).
3. Clean inside of Razor
Head Assembly and
Hair Chamber with long
bristles of brush.
4. Press Razor Head Assem-
bly back on razor hous-
ing.
IMPORTANT: Do NOT
interchange the cutters and
combs. They are a matched
set and if interchanged may
adversely affect shaving
performance until cutters
reseat themselves. Therefore,
remove, clean, and replace
each set individually.
1. Remove Razor Head
Assembly (Fig. 7).
2. While holding Razor
Head Assembly in one
hand, press center wheel
down while turning
counterclockwise to re-
lease frame and lift out.
Set frame aside (Fig. 8).
3. Remove one cutter/
comb, at a time, out of
frame as shown (Fig. 9).
4. Cutter should be held as
shown and brushed in an
upward motion (Fig. 10).
Clean inside of comb with
long
bristles of brush in a
circular motion.
5. For consistently close and
comfortable shaves, razor
heads should be cleaned
and lubricated every 4-8
weeks. Clean heads in
a degreasing liquid (e.g.
Norelco Razor Cleaner,
RAZORMATE Electrosonic
Cleaner or alcohol).
6. While holding Razor
Head Assembly in one
hand, gently place one
cutter/comb back into
Assembly (Fig. 11).
7. Repeat procedure for
other two cutting heads.
8. Replace frame, with
cutting heads in place,
back into Razor Head
Assembly. While press-
ing down, turn wheel
clockwise to lock frame
into place (Fig. 12).
9. Press Razor Head
Assembly back on razor
housing.
10. Spread Norelco Razor
Lubricant, model AL80,
or one drop of mineral
oil over floating heads
with your finger.
8. HQ4 REPLACE-
MENT HEADS
AND RAZOR
ACCESSORIES
Replacement Heads:
The self-sharpening rotary
blades in your Norelco
razor are precision-made to
give closer shaves. When
they finally do need replac-
ing, specify only Norelco
brand replacement cutters
and combs, model HQ4.
DO NOT USE shaver
sharpeners as this will
damage your blades and
lifters and will adversely
affect the shaving perfor-
mance.
NOTE: It is recommended
that you replace your razor
heads once a year.
Razor Cleaners:
Norelco RAZORMATE Electro-
sonic Heads Cleaner, model
ERC100.
Norelco Razor Cleaner,
model RC1776.
Norelco Razor Lubricant,
model AL80.
Norelco Razor Accessories
may be purchased at a store
near you, at an Authorized
Norelco Service Location, or
by using the handy order
form enclosed.
9. IMPORTANT
BATTERY
DISPOSAL
INFORMATION
When discarding your razor:
THIS NORELCO RAZOR
CONTAINS NICKEL-CAD-
MIUM RECHARGEABLE
BATTERIES WHICH MUST
BE RECYCLED OR DIS-
POSED OF PROPERLY.
Refer to enclosed instruc-
tion sheet for directions on
removing rechargeable bat-
teries.
CAUTION:
■ Batteries should be re-
moved by consumer
only
when razor is to
be discarded.
■ Make sure razor is un-
plugged before disman-
tling for battery re-
moval.
■ All servicing or battery
replacement should be per-
formed by an Authorized
Norelco Service Location
only.
60-Day Money-Back Guarantee
R
To enjoy the closest and most comfortable shave from your new
Norelco Men’s Razor, the razor should be used exclusively
for 3
weeks. This allows your hair and skin enough time to adapt to the
Norelco Shaving System. If, after that period of time, you are not
fully satisfied with your Norelco Men’s Razor, send the product back
and we’ll refund you the full purchase price.
The razor must be shipped prepaid by insured mail, insurance
prepaid, and have the sales slip, indicating purchase price and
the date of purchase, enclosed. The razor must be postmarked
no later than 60 days
after the date of purchase. Norelco reserves
the right to verify the purchase price of the razor and limit refunds
not to exceed suggested retail price.
Send dated sales slip, your complete name and address as indicated
below, and the razor, prepaid to:
Norelco Consumer Products Company
A Division of Philips Electronics North America
Corporation
P.O. Box 1116
Skokie, IL 60076
Please allow 4-6 weeks for delivery of check.
Please Print!
NAME:
ADDRESS:
CITY:
STATE: ZIP:
TELEPHONE NO.: ( )
REASON FOR RETURNING:
Area Code
7
6
8
10
9 11 12
7B.ONCE EVERY 4-8 WEEKS