Philips 3605x Electric Shaver User Manual


 
4.
INDICATIONS
LED Charging Indicator Light
The green LED Charging Indicator Light will light up to
indicate razor is (re)charging.
CHARGING
Battery performance is best if you recharge only when
the batteries are (almost) completely empty.
Charging or recharging at temperatures below 40ºF or
higher than 95ºF adversely affects lifetime of batteries.
Continuously recharging will reduce life of batteries.
If razor has not been used for at least 1 month, razor must
be recharged for a full 16 hours.
Do not charge razor in pouch (model 3605X only).
1 Before charging, set Voltage Selector to desired setting.
To change voltage from 115V to 230V AC, slide switch
found on bottom of razor to desired voltage.
2 Connect cord to razor. Plug into any 120V to 240V AC
outlet. Use only the cord provided.
An adaptor plug may be necessary for cord usage in some
foreign countries.
3 First time charging and recharging after non-use for
1 month or more requires a full 16 hours.
5.
SHAVING
Use your new razor exclusively for 3 weeks to fully enjoy
the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to adjust.
Invest 3 weeks and you'll soon experience the full joy
of your new razor.
* Stick with it! If you alternate shaving methods during
the adjustment period, it may make it more difficult to
adapt to the Norelco shaving system.
Shaving with skin dry gives the best results.
1 Turn razor ON. Shave against the direction of beard growth
using both straight and circular movements.
2 Stretch your skin with your free hand so blades can lift
and cut whiskers. Gently press razor to skin.
3 Turn razor OFF.
4 Put the protective razor head cap on the razor to
protect razor heads.
5 Replace your Norelco Double Action razor heads
(model # HQ4) once a year for optimal shaving results.