Philips 1059X Electric Shaver User Manual


 
ENGLISH
Activating the Travel Lock
C
1 Press the ON/OFF button for 3 seconds
until the lock symbol appears on the
display. For model 1090X only, you will also
hear a beep.
2 The travel lock has now been activated.
Deactivating the Travel Lock
1 Press the ON/OFF button for 3 seconds.
2 The razor turns ON to indicate that the
razor has been unlocked. The razor is now
ready for use.
B
The razor unlocks automatically when you place
the razor in the power pod or charging stand
while plugged in.
Cleaning
C The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
Always clean your razor after each use.
Regular cleaning guarantees better shaving
results.
Always switch razor OFF and remove from
charging stand or power pod before cleaning.
Never remove or replace Razor Head
Assembly while motor is on.
22
ENGLISH
Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
Never dry the shaving unit with a towel or
tissue as this may damage razor heads.
DO NOT attempt to disassemble the Razor
Head Assembly to individually replace or
clean each cutter and comb. The individual
shaving heads (cutters and combs) are NOT
removable/replaceable.
Do not use abrasives, scourers or liquids such
as acetone to clean the razor.
C
1 The faucet symbol will start blinking after
each shave to remind you that the razor
needs to be cleaned.
Razor Head Assembly: After Each Use
◗ It is recommended that you clean the Razor
Head Assembly thoroughly after each use to
maintain optimal shaving performance.
1 Turn razor OFF.
C
2 Using your thumb and forefinger, grasp the
sides of the shaving head near the center
of the assembly and pull each individual
shaving head open.
23