Philips 100 series Electric Toothbrush User Manual


 
8 9
5
USING
1
2
3
Use AirFloss - AirFloss is designed to be used on the outside of the teeth. Place
the tip between teeth and apply gentle pressure. Press activation button to deliver
a burst of air and water. Glide the guidance tip along the gum line until you feel it
settle between the next two teeth. Press the activation button again and repeat for
all spaces including behind your back teeth. Press power on/off button to turn power
off after use.
Preparing AirFloss - To use, attach nozzle, ll reservoir with water or mouthwash.
After lling the reservoir, press the power on/off button to turn on, then press the
activation button approximately 6 times or until spray is produced. The reservoir
holds enough liquid for approximately 2 uses. Replace the nozzle every 6 months for
optimal results.
i
4
4
PREPARING FOR USE
1 2 3
4
5
6
6