Filter
Top Products
6 C635M-QS (8/03)
CLIENT CONFIGURATION UTILITY
You can find this application on the viewstation. With this application you can build a list of local servers and export them to the
recorders.
ᕡ Make sure that the recorder and viewstation are connected to the network switch.
ᕢ Go to Start > Programs > DX9000 Viewstation > Client Configuration Utility.
ᕣ Log in. The default user name and password is admin/admin. The following page appears.
Figure 6. Client Configuration Utility Page
ᕤ Select “Build a list of local servers.”
ᕥ Select “Custom naming.”
NOTE: The Standard naming option is used if all recorders have the same name and the only difference is the numbers. For
example, Pelco1, Pelco2, Pelco3.
ᕦ Enter a recorder name and then click Add.
ᕧ Click Configure.
NOTE: Repeat steps 6 and 7 for each recorder.
ᕨ Select “Export to server” and then the name of the first recorder from the drop-down box.
ᕩ Click Configure.
NOTE: Repeat steps 8 and 9 for each recorder that is in the drop-down box.
ᕧ
ᕨ
ᕤ
ᕥ
ᕦ