Filter
Top Products
C2453M-D (2/06) 9
Refer to Figure 5 for the following steps.
ᕥ
Open the monitor compartment. Connect the top flap to the side flap. This will reduce the glare
of the sun on the monitor when using the kit outdoors. This step is not required if there is no glare
on the monitor.
ᕦ
Fold the loose part of the bottom flap under and attach to the Velcro
®
.
ᕧ
Open the handheld compartment. Attach the two side Velcro strips to the Velcro strips on the
monitor compartment. This will support the handheld during use.
ᕨ
Attach the side flaps of the handheld compartment to the top and bottom flaps. Refer to Figure 6,
Figure 7, and Figure 8 for final views of the kit assembly.
Figure 5.
Assembly Steps
ᕥ
Through
ᕨ
ᕥ
ᕧ
ᕨ
ᕦ
ᕨ