Panasonic H-H020A Microscope & Magnifier User Manual


 
4
VQT5B48 (ENG)
Lens Care
Sand and dust can damage the lens. Make
sure that no sand or dust gets inside the lens
or the terminals when using the lens on a
beach, etc.
This lens is not waterproof. If drops of water
get onto the lens, wipe the lens with a dry
cloth.
Do not press the lens with excessive force.
When there is dirt (water, oil, and fingerprints, etc.)
on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.
Do not place the lens mount facing downwards.
Do not allow the lens contact points 1 to become
dirty.
About Condensation (Fogging of the
Lens)
Condensation occurs when there are differences
in temperature and humidity as described below.
Condensation can cause the lens to become dirty
and lead to mold and malfunctioning, so exercise
caution in the following situations:
– When the camera is brought indoors from outside
during cold weather
When the camera is brought into an air-
conditioned car
When cold air from an air conditioner is directly
blown onto the lens
In humid places
Put the camera into a plastic bag to allow it to
acclimatize to the surrounding temperature in
order to prevent condensation. If condensation
occurs, turn the power off and leave it for about
two hours. Once the camera acclimatizes to the
surrounding temperature the condensation will go
away naturally.
Precautions
VQT5B48_ENG_SPA.book 4 ページ 2013年5月29日 水曜日 午後3時39分