Filter
Top Products
7
English
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release button and lift the outer foil section
upwards.
Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section to the
shaver until it clicks.
1
2
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
►Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
2. Insert the inner blades one at a time until
they click.
▼ ▼
To remove light dirt For heavy dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
4. Turn the shaver off after
10 ‑ 20 seconds.
5. Remove the outer foil
section and turn the shaver
on.
6. Clean the shaver and the
outer foil section with
running water.
• Rinse with water and
shake up and down
several times to remove
the water.
▼ ▼
7. Wipe off any drops of water with a dry
cloth.
8. Dry the outer foil section and the shaver
completely in a shaded area.
9. Attach the outer foil section to the shaver.
• Open the cleaning shutter.
• The outer foil section will dry faster if
removed from the main body.
8
ES-SL41_US.indb 7 2011/12/20 10:51:30