Filter
Top Products
5
Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water-
tight shaver in the shower and clean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
Wet/Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust
to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than six months.
Parts identification
(see fig. 1)
A Protective cap
B System outer foil
C System outer foil release but-
tons
D Foil frame
E Inner blades
F Foil frame release buttons
G Switch lock button
H On/Off switch
I Recharge lamp/Charge status
lamp
J Trimmer
K Trimmer handle
L Charging adaptor holder
M Charging adaptor with auto-
matic voltage adjustment
N Rotatable stand
O Cleaning brush
P Wall mount
Q Travel pouch
How to use the wall mount
The charging adaptor can be hung
on the wall using wood screws.
1. Lift up the charging adaptor
holder. (see fig. 1 (A))
2. Select an appropriate location on
the wall where the screws can go
in.
3. Attach the wall mount to the wall
as shown with the wood screws,
making sure that the arrow points
up.
4. Slide the charging adaptor
grooves into the wall mount until
it clicks in. (see fig. 1 (B))
To remove the charging adaptor from
the wall mount, slide the adaptor
upward.
Charging adaptor
(see fig. 1)
Lift the charging adaptor holder until
it clicks in when charging the shaver.
(see fig. 1(A))
(Restore the charging adaptor holder
when carrying the unit.) (see fig.
1(C))
Rotate the stand on the bottom of
the charging adaptor when you need
extra stability. (see fig. 1(D))
Charging
(see fig. 2)
Place the charging adaptor upright
on a flat surface or mount it on a wall.
Plug the adaptor into an AC outlet.
It will adjust automatically to voltages
OS01G108_ES7016_EUR_en 1/28/02, 9:29 AM5