Filter
Top Products
98
may cause injury.
Apply the shaver head so that the
whole blade is in close contact with
the skin.
Press gently and guide the appliance
slowly against hair growth. Applying
with too much force prevents hairs
from being guided to the blades so
that some areas may be left
unshaved.
Trimmer
It is helpful to use the trimmer only
when you want to cut the long hair.
When the trimmer is up, apply the
blade gently.
Shaving with pre-epilation comb
When the hair is long before epilation,
we recommend you to use a shaver
head with pre-epilation comb.
Place the pre-epilation comb onto
the shaver head, and slide trimmer
up. When the pre-epilation comb is
in place, make sure the comb is in
close contact with the skin.
Further useful tips
• In the beginning, it is advisable to
epilate in the evening so that any
possible reddening can disappear
overnight. When you feel pain or
rash appears, cool the skin with
cold towel.
• Hair is easier to remove after
bathing or showering.
But your skin must be completely
dry!
• In order to prevent the risk of
ingrowing hairs, we recommend
the regular use of massage
sponges, e.g. after showering, or
exfoliation peelings.
Cleaning (Fig. 4)
Switch off and unplug the appliance
before cleaning.
Cleaning of the epilation head
Push the frame release buttons and
remove the frame.
Brush the frame.
While cleaning, you can turn the
epilation discs manually.
Be careful not to break the skin
protector when cleaning.
For disinfection of the epilation
discs please use only pure alcohol.
Attention! Wipe the main body only
with a damp cloth. The use of
alcohol etc. may cause discoloration
or deformation of the main body.
After cleaning, put the cap on the
epilation head.
Cleaning of the shaver head
(ES2029 only)
Push the frame release buttons and
remove the frame.
Remove the inner blade by lifting
straight up.
Clean with the brush.
Be careful not to apply too much
force to the outer foil.
After cleaning, put the pre-epilation
comb on the shaver head.
Replacing the outer foil of
the shaver head (Fig. 5)
Never remove the outer foil for
other reason than to change it.
Removing the outer foil
While pushing the outer foil gently
hour) charge.
• After the epilator has been
thoroughly charged it is OK to
leave it plugged in.
How to operate your
epilator (Fig. 2)
Check to see that the skin protector
and discs are not damaged or
deformed. If they are then please
do not use the appliance.
If you are concerned about pain
during epilation then please use
with 1 (low speed) setting.
Cordless operation of the epilator
(ES2029 only)
• Remove the cap.
• Attach the frame you wish to use.
• Slide the switch to the 1 (low
speed) or 2 (normal speed) position
and carry out epilation.
• After completing epilation, slide the
switch to the “0·charge” position.
Operating the epilator on AC
power (Fig. 2)
• Slide the on/off switch to the
“0·charge” position.
• Insert the power cord securely
into the epilator.
• Plug the AC adaptor securely into
an electrical outlet. Always check
to see that the charge indicator
light is on.
• Remove the cap.
• Attach the frame you wish to use.
• Slide the switch to the 1 (low
speed) or 2 (normal speed) position
and carry out epilation.
• After completing epilation, slide the
switch to the “0·charge” position.
• Unplug the power cord from the
electrical outlet and the appliance.
Correct usage for best epilation
results
• When the hair is long, it makes
hair removal easier and reduces
pain to trim the hair before
epilation. Leg and arm hair should
be shortened a length of 3 to 5
mm, and underarm and bikini-line
hair to a length of 1 to 2 mm.
• Apply epilator at right angles (90°)
against your skin. For best epilation
results keep in contact with the
skin surface. Press gently and
guide the epilator slowly against
hair growth. (Fig. 3)
• Rub your skin to lift short hairs.
• Move the epilator slowly on the
skin with the skin protector vertically
touching.
Epilation attachment without skin
protector
Please use Epilation attachment
(no skin protector)
D
D
for quicker
epilation.
Shaving
For legs and arms
It is helpful to use a shaver head
with pre-epilation comb.
For underarms and bikini-line
It is helpful to use a shaver head 3
to 5 days before using the epilator.
Shaving
Before using, make sure the blade
is not warped or damaged, as this