Filter
Top Products
8
Cleaning the blade
1. Brush off any
hairs from the
clipper and
from around
the blade.
2. Remove the
blade and brush
off the hairs
from the blade
edge.
3. Brush the hairs out from
between the stationary
blade and the moving blade
while pressing down on the
cleaning lever to raise the
moving blade.
Lubrication
1. Apply a few drops of the oil to the
space between the stationary blade
and moving blade.
Apply the oil to the clipper before and
after each use.
2. Set the dial to “2.0” and then
remount the blade on the clipper.
•