Filter
Top Products
7
GB
MAXIMUM AND MINIMUM
TEMPERATURES
The maximum and minimum recorded indoor and outdoor
temperatures will be automatically stored in memory. To display
them, press [ MEM ] once to display the maximum temperature
and again the minimum temperature. The respective indicators,
[ MAX or MIN ] will be displayed.
To clear the memory, hold down [ MEM ] for two seconds. The
maximum and minimum temperatures will be erased. If you press
[ MEM ] now, the maximum and minimum temperatures will have
the same values as the current ones until different readings are
recorded.
DISCONNECTED SIGNALS
If without obvious reasons the display of the outdoor temperature
goes blank, press [ ] and [ ] to enforce an immediate search.
If that fails, check:
1. The remote unit is still in place.
2. The batteries of both the remote unit and main unit. Replace as
necessary.
Note: When the temperature falls below freezing point, the batteries
of outdoor units will freeze, lowering their voltage supply
and the effective range.
3. The transmission is within range and path is clear of obstacles
and interference. Shorten the distance when necessary.
TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home
security systems and entry controls, may interfere with those of this
product and cause temporarily reception failure. This is normal and
does not affect the general performance of the product. The
transmission and reception of temperature readings will resume once
the interference recedes.
NOTE ON °C AND °F
The unit of temperature display can be selected by pressing °C / °F
button repeatedly.
Temperature readings are
securely registered.
The unit is in searching mode.
No signals.