Oregon Scientific RGR126 Thermometer User Manual


 
EN
11
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are a
few precautions:
Do not immerse the unit in water.
Do not clean the unit with abrasive or corrosive
materials. They may scratch the plastic parts and
corrode the electronic circuit.
Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
Do not tamper with the unit's internal components.
Doing so will invalidate the warranty on the unit
and may cause unnecessary damage. The unit
contains no user-serviceable parts.
Only use fresh batteries as specified in the user's
manual. Do not mix new and old batteries as the
old ones may leak.
Always read the user's manual thoroughly before
operating the unit.
TEMPERATURE
OUTDOOR
The outdoor temperature is displayed on the 3rd line of
the LCD display. Use the °C / °F button to select between
Centigrade and Fahrenheit display units.
INDOOR
The indoor temperature is displayed on the 4th line of
the LCD display. Use the °C / °F button to select between
Centigrade and Fahrenheit display units.
RESET
This button should only be used when the unit is
operating in an unfavorable way. Use a blunt stylus to
hold down the button. All settings will return to their
default values.
RGR126(R13)-4(final) 4/6/05, 5:46 PM11