Filter
Top Products
8
dental hygienist. If you have sensitive teeth and
gums, Oral-B recommends using the «Sensitive»
mode.
Brushheads
The Oral-B FlossAction brush head (a) is recom-
mended for everyday deep cleaning. It features
micropulse bristles that get in hard-to-reach
areas between your teeth, gently removing
hidden plaque.
For occasional or everyday whitening, please
use the Oral-B ProWhite (j) brush head (not
with all models). It features a dentist-inspired
polishing cup to remove surface stains from
coffee, tea and tobacco for effective brightening.
Please note that children under 12 years old
should not use the Oral-B ProWhite brush head.
Do not use the Oral-B FlossAction or Oral-B
ProWhite brush head with braces. We recom-
mend using the Oral-B Ortho brush head, which
is specifically designed to clean around braces
and wires.
The FlossAction™ and ProWhite™ brush heads
feature blue Indicator
®
bristles helping you to
monitor brush head replacement need. With
proper brushing, twice a day for two minutes,
the blue color will fade halfway approximately
within 3 months, signaling that it is time to
change the brush head.
SmartGuide display unit
Displayed
Icon
Meaning
«Clean» mode
«Sensitive» mode
«Massage» mode
«Polish» mode (not with all
models)
Too much pressure is applied.
Reduce the brushing force.
«Quadrant circle» – currently you
are brushing in the first 30-second
interval. Move to the next quadrant
of your mouth, when the second
segment starts flashing.
Dentist recommended 2-minute
brushing time has been reached.
The rechargeable battery of the
handle is low. Charge the tooth-
brush handle.
Batteries of the SmartGuide
display unit are low. Change
batteries of the display unit.
Wall mount
If you prefer to mount the SmartGuide display
unit on a wall, mirror or other surface, use the
adhesive tape (m) to fix the wall mount. Before
doing so, make sure the chosen surface is clean
and dry (remove grease and dust first). Position
the wall mount that the Oral-B logo is readable.
Then press the wall mount evenly and firmly to
the wall. Wait 24h before sliding the SmartGuide
display unit into the fixed wall mount.
Please note: the adhesive tape will not work on
dirt-repellent surfaces.
Cleaning recommendations
• After brushing, rinse your brush head
thoroughly under running water.
• Remove the brush head from the handle and
clean both parts separately under running
aa
jj
98973812_D30_NA.indd 898973812_D30_NA.indd 8 28.05.2009 13:52:35 Uhr28.05.2009 13:52:35 Uhr