Filter
Top Products
9
Notes on Safety
Caution
When you are not going to use the unit for a long period of time, be sure to remove the AC adapter
from the electric outlet.
You may suffer electric shock, or electric leak or ¿ re may arise because of deteriorated insulation.
Be sure to remove the AC adapter from the electric outlet when installing, removing, or cleaning the
part.
You may suffer electric shock or injure yourself.
Pull the AC adapter from the electric outlet when cleaning the unit.
You may suffer electric shock.
•
•
•
In the following case, con¿ rm the measurement with the stethoscope.
(1) When an irregular pulse wave is displayed
· An error may be displayed when an external vibration is applied or the patient moves his/her body.
(2) When an error is generated or the measured value is doubtful
· An error may be displayed when an external vibration is applied or the patient moves his/her body.
· An error may be generated in the measured value or the blood pressure may not be able to measure for the
patient having peripheral circulatory disturbance or extreme hypotension.
· An error may be generated in the measured value or the blood pressure may not be able to measure for the
patient having short variation of blood pressure such as arrhythmia.
After cleaning the unit, dry it well, then insert the AC adapter to the electric outlet.
You may suffer electric shock.
Insert the AC adapter to the electric outlet as far as it goes.
Wipe off the dust on the AC adapter.
You may suffer electric shock, or there may be short circuit or ¿ re ignition.
If you ¿ nd any trouble with this unit, immediately stop using it, turn off the power, pull out the AC
adapter from the electric outlet, then contact the repair department.
You may suffer electric shock, or there may be short circuit or ¿ re ignition.
•
•
•
Do not disassemble or remodel the unit.
You may suffer electric shock, or there may be short circuit or ¿ re ignition.
•
Do not use the unit to the patient using a pump oxygenator.
The unit can not measure correctly. The unit cannot measure when it cannot detect any beat.
Do not use the AC adapter and the battery pack not speci¿ ed for this unit.
It may cause ¿ re or electric shock.
Do not use a portable phone near the unit.
The unit may malfunction.
Do not install the parts and/or instrument not speci¿ ed for this unit.
It may cause damage to the unit.
Do not use the damaged power cord or AC adapter, or loose electric outlet.
You may suffer electric shock, or there may be short circuit or ¿ re ignition.
Do not damage the power cord of the AC adapter by placing heavy thing on it or pinching it, or modify,
forcibly bend, pull, twist, or bundle it.
You may suffer electric shock or there may be electric leak and ¿ re because of deteriorated insulation.
•
•
•
•
•
•