Filter
Top Products
The monitor automatically determines your ideal inflation level.
In rare circumstances when a higher inflation may be necessary, the
monitor automatically re-inflates the cuff up to 30 mmHg higher than
the initial inflation and restarts the measurement.
The monitor detects the pulse during inflation. Do not move your arm
and remain still during the measurement.
1. Press the ON/OFF START button
All display symbols appear on the screen. The screen changes to
display the User ID symbol with the current time.
NOTE:
• The screen will display the User ID last used.
• The default setting is A.
2. Press the USER ID button
Select the desired user. The display alternates
between A and B. You do not need to press this
button if no change is needed.
3. Press the ON/OFF START button
The cuff starts to inflate automatically.
NOTE: To stop the inflation or measurement, push the ON/OFF
START button. The monitor will stop inflating, start deflating,
and will turn off.
15
TAKING A MEASUREMENT
HEM-741REL 8-29 Final Rev 1/23/06 9:27 AM Page 15