Filter
Top Products
29
Care and Maintenance
ERROR INDICATORS
ERROR
DISPLAY
CAUSE CORRECTION
Your palms or feet are not
positioned over the electrodes
correctly.
Make sure you are barefoot.
Make sure your palms or the soles of your feet
are clean and dry.
Make sure your palms or feet are correctly
positioned.
Refer to CORRECT POSTURE FOR
MEASUREMENT on page 22 and How to
Hold the Grip Electrodes on page 23.
The measurement position was not
stable.
Your palms or feet were not placed
correctly.
Remain still and do not move until the
measurement is complete.
Refer to CORRECT POSTURE FOR
MEASUREMENT on page 22 and How to
Hold the Grip Electrodes on page 23.
Your palms or feet are too dry.
Slightly moisten your palms or the soles of
your feet with a damp towel and retake the
measurement.
The Body Composition values are
outside the measurement range.
• Check the settings entered for your personal
data. Change the settings if needed. Retake
the measurement.
• The main unit cannot measure body
composition outside its measurement range,
even if the age, gender and height settings are
correct. Refer to Display and Set Ranges on
page 34.
The monitor is not set up correctly.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to BATTERY
INSTALLATION on page 16.
Press the Power Switch and turn the monitor
on. Retake the measurement.
You stepped onto the measurement
platform before 0.0 lb was
displayed.
Wait until 0.0 lb is displayed before stepping
onto the measurement platform.
The monitor was moved before
0.0 lb was displayed.
Do not move the monitor until 0.0 lb is
displayed.
Movement during measurement. Do not move until measurement is complete.
Monitor detected weight over
330.0 lb.
This monitor can only be used by people
weighing less than 330.0 lb.