Filter
Top Products
17
CARE AND MAINTENANCE
TROUBLESHOOTING TIPS
PROBLEM CAUSE AND SOLUTION
Low Battery Indicator
No power
No display appears on the unit
Check the battery installation for proper
placement of the battery polarities.
Replace all four worn batteries.
The weight value is displayed abnormally
low or high
.
Place the monitor on a hard, level floor.
The % FAT value is displayed abnormally
low or high.
Refer to “When to avoid taking a measurement”
on page 13, and “Recommended Measurement
Times” on page 6.
Other conditions
Remo
ve the batteries. Wait one minute.
Reinstall the batteries. Refer to “Battery
Installation” on page 9.
To keep your Fat Loss MONITOR with Scale in the best condition and protect the unit from damage
follow the directions below:
Clean the unit with a soft dry cloth. Avoid using any abrasive or volatile cleaners. The unit is not
waterproof; do not immerse the unit in water.
Stor
e the unit in a safe and dry location.
Do not e
xpose the unit to direct sunlight, extreme hot or cold
temperatures or humidity. Thoroughly dry any moisture off the unit before storing. Store the unit safely
out of the reach of children.
Do not subject the unit to str
ong shocks
, such as dropping the unit on the floor
.
Remove the batteries if the unit will not be used for three months or longer.
Use the unit consistent with the instruction provided in this manual.
HBF-400-IM 2/20/06 5:50 PM Page 17