Omron SC100 Scale User Manual


  Open as PDF
of 14
 
6
bATTERy INSTALLATION
BATTERY PLACEMENT
Beforeusingthisscaleforthersttimeyoumustrstinstalltheenclosedbattery.You
willneedtopulloutthebatteryinsulationlmwhenyouinsertthebatteryfortherst
time.
1. Open the battery cover.
2. Put one 3V lithium battery into the battery box
(positivepoleupward)andthentightlyclosethe
battery box.
NOTE:
When installing the battery, please do not press the base
of the scale, it may cause an inaccurate measurement.
If this happens, reinstall the battery or place the scale on
aatsurfaceforatleast20minutesbeforeyoutakethe
measurement again.
WHEN YOU INSTALL THE BATTERY FOR THE FIRST TIME
1. This is what the display looks like after initial battery placement.
2. After1-2secondsthedisplaywillreturntozero.
3. Placethescalehorizontallyonaatsurface.
The power turns off after the scale displays the
valueautomatically(Note:thevalue1.5is
forinstance)
 previous next