Omron m2 Blood Pressure Monitor User Manual


 
5
Important Safety Information
EN
Do not leave the cuff wrapped on the arm if taking measurements
during the night. This could result in injury.
Do not inflate the arm cuff over 299 mmHg.
Do not use a mobile phone or other devices that emit electromagnetic
fields, near the unit. This may result in incorrect operation of the unit.
Do not operate the unit in a moving vehicle (car, airplane).
To inflate the cuff manually, refer to Chapter 3.4. If the cuff is over
inflated, it can cause internal bleeding.
(AC Adapter Usage)
Use only the original AC adapter (optional) designed for this unit. Use
of unsupported adapters may damage and/or may be hazardous to
the unit.
Plug the AC adapter into the appropriate voltage outlet.
Do not use the AC adapter if the unit or the power cord is damaged.
Turn off the power and unplug the power cord immediately.
(Battery Usage)
If battery fluid should get on your skin or clothing, immediately rinse
with plenty of clean water.
Use only four “AAA” alkaline batteries with this unit. Do not use other
types of batteries.
Do not insert the batteries with their polarities incorrectly aligned.
Replace old batteries with new ones immediately. Replace all four
batteries at the same time.
Remove the batteries if the unit will not be used for three months or
more.
Do not use new and used batteries together.
General Precautions
Do not apply strong shocks and vibrations to or drop the unit and arm
cuff.
Do not take measurements after bathing, drinking alcohol, smoking,
exercising or eating.
Do not forcibly bend the arm cuff or bend the air tube excessively.
When removing the air tube, pull on the air plug at the connection with
the main unit not the tube itself.
Do not inflate the arm cuff when it is not wrapped around your arm.