Filter
Top Products
EN
3
Maintenance
Taking measurements on the right arm
Apply the cuff so that the air tube is at the side of
your elbow.
• Be careful not to rest your arm on the air tube, or
otherwise restrict the fl ow of air to the cuff.
• The cuff should be 1 to 2 cm above the elbow.
3. When the cuff is positioned correctly, close the
fabric fastener FIRMLY.
• Stains on the cuff can be carefully removed using a
moist cloth and soapy water.
• Do not fold the cuff or air tube together too tightly
and do not crease them.
• Do not store the cuff in the following situations:
- If the cuff is wet.
- Locations exposed to extreme temperatures, hu-
midity, direct sunlight, dust or corrosive vapours.
- Locations exposed to vibrations, shocks or where
it will be at an angle.
This cuff fulfi ls the previsions of EC directive 93/42/EEC (Medical Device Directive).
Manufacturer OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN
EU-representative OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com
Production facility
OMRON (DALIAN) CO., LTD
Dalian, CHINA
Subsidiary
OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH
John-Deere-Str. 81a, 68163 Mannheim, GERMANY
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE
Made in China
This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., JAPAN.
3.