Filter
Top Products
Infrared Thermometer
6
give inaccurate readings. Please note this during
applications.
• Maintenance
Blow off loose particles using a lens blow. Gently brush
remaining debris away with a lens brush. Carefully wipe
the surface with a moist cotton swab. The swab may be
moistened with water.
NOTE:
Don’t use solvents to clean the lens.
• Replace Battery
When the battery voltage drops
below that required for reliable
operation, the low battery
symbol will appear,
indicating it is the time to
replace the battery.
To change the 9V battery,
detach the battery compartment
cover by pushing the engraved
pattern on the handle and pull
down. Change the 9V battery
with new one and put the
battery cover back.
LASER RADIATION -
OUTPUT < 1mW AT 630 670mm
DO NOT STARE INTO BEAM
CLASS II LASER PRODUCT
OPEN
CAUTION