Filter
Top Products
Infrared Thermometer
2
I. SAFETY INFORMATION
•
Read the following safety information carefully before
attempting to operate or service the meter.
• Only qualified personnel should perform repairs or
servicing not covered in this manual.
•
Periodically wipe the case with a dry cloth. Do not use
abrasives or solvents on this instrument.
•
Safety symbols:
Dangerous, refer to this manual before using the
meter.
Apply with European CE.
This instrument conforms to the following standards:
EN50081-1: 1992 Electromagnetic Emissions
EN50082-1: 1997 Electromagnetic Susceptibility
Test were conducted using a frequency range of 80-1000
MHz with the instrument in three orientations. The average
error for the three orientations is ± 2.0°C (±4.0°F) at 3V/m
throughout the spectrum. However, between 300 MHz and
500 MHz at 3V/m, the instrument may not meet its stated
accuracy.
Warning of laser!
Do not point laser directly at human eye or
indirectly from reflective surfaces.
II. CAUTIONS
Before using the infrared thermometer the operator must
notice the following: