Filter
Top Products
(10) “TYPE” button (MAIN)
Press this button to change the type of thermocouple in
the main display (K/J/T/E/R/S/N). If the inputs of the main
and second displays are the same, then pressing this button
will change the thermocouple type for both displays.
(11) “TYPE” button (SECOND)
Press this button to change the type of thermocouple in
the second display (K/J/T/E/R/S/N). If the inputs of the
main and second display are the same, then pressing this
button will change the thermocouple type for both displays.
SETUP MODE
The following functions can only be used in the setup
mode.
(2) “[Limits]” button (Hi/Lo limit setting)
and
Mini DIN output
Press the LIMITS button to enter the Hi/Lo Limit setup
function, the “LIMIT”, “HI”, and main display will blink
on the LCD, and the previous settings are displayed. Press
the number button printed on the overlay in white to
set Hi or Lo limit value. the resolution of Hi/Lo limit setup
is 1 count. The button “-” (same button as the ESC) can be
used to set negative values. Setting is from left to right digit.
Press the “ENTER” button to confirm each setting.
3) “[INVT]” button (Interval time setting)
To setup the time interval for the log function, press the
[INVT] button to set the time. The indicator “INV” will be
blinking on the topright of the LCD and the previous settings
will be displayed. Press the number button printed on the
overlay in white to change the time interval. Setting is from
left to right of the following format (HH:MM:SS). Press the
overlay “ENTER” button to confirm. To exit this function,
press the ESC button.
HH: Interval Hour (0~23)
MM: Interval Minute (0~59)
SS: Interval Second (0~59)
MAX: 23:59:59
MIN:00:00:01
(8) “[APO]” button (Auto power off /time
setting,
min. 5 minutes)
Use this function to change the time for the Auto Power
Off (APO) function. Press the [APO] in setup mode, and the
indicator “APO” and the main display will blink on the
LCD, and the previous setting will be displayed. The
default time for APO is 5 minutes. Press the Number button
printed on the overlay in white to set the APO time.
Press the overlay “ENTER” button to confirm. To exit this
function without changing the setting, press the ESC
button.
MAX: 19999 minutes
MIN: 0005 minutes
(9) “[OFS]” button (Thermocouple offset adjust)
When the main display input is T1 and socket thermo-
couple is connected, the instrument can adjust the offset of
the thermocouple or vice-versa for T2. In the setup mode,
press this button to enter the thermocouple Offset Setup
Function (OFS) and the indicator CAL should be displayed on
the top righthand corner of the LCD while the main display
blinks. While the previous setting is displayed, press the
Number button printed on the overlay in white to change
or set the offset of the thermocouple. The resolution of
the setup is 0.1. Press the “-” button to set the negative
value. Press the overlay “ENTER” button to confirm.
MAX: 1999.9 C/F
(12) “[TIME]” button (System date and time setting)
To set or change the system time, press the [TIME]
button in the setup mode. The time and date on the third
display panel should blink. Enter from left to right in the
following format: YY:MM:DD and HH:MM:SS. Press
the Number button printed on the overlay in white word to
set the system date and time. Press the “ENTER” button
to confirm. Exit this function by pressing the ESC button.
PROCEDURE OF CALIBRATION
1. Make ADJ pin short.
2. T2 input for a voltage of 70mV will show a value
higher than 28000 2dgts at the third display and then
press “set[]” key in the next step.
3. T1 input for a temperature of 0C will show a value
5C at the main display. Press “set[]” key
to complete the calibration.
4. Take off the short pin.
OPERATOR MAINTENANCE
Battery Replacement
Power is supplied by a 9 volt “transistor” battery.
(NEDA 1604, IEC 6F22). The “
” appears on the LCD
display when replacement is needed. To replace the bat-
tery, remove the two screws from the back of the meter and
lift off the battery cover. Remove the battery from battery
contacts.
WARNING
To avoid possible electrical shock, disconnect the
thermocouple connectors from the thermometer
before removing the cover.
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of
defects in materials and workmanship for a period of 13
months from date of purchase. OMEGA’s WARRANTY adds an
additional one (1) month grace period to the normal one (1)
year product warranty to cover ling and shipping time.
This ensures that OMEGA’s customers receive maximum
coverage on each product.
If the unit malfunctions, it must be returned to the factory for
evaluation. OMEGA’s Customer Service Department will issue
an Authorized Return (AR) number immediately upon phone or
written request. Upon examination by OMEGA, if the unit is
found to be defective, it will be repaired or replaced at no
charge. OMEGA’s WARRANTY does not apply to defects
resulting from any action of the purchaser, including but not
limited to mishandling, improper interfacing, operation outside
of design limits, improper repair, or unauthorized modification.
This WARRANTY is VOID if the unit shows evidence of having
been tampered with or shows evidence of having been
damaged as a result of excessive corrosion; or current, heat,
moisture or vibration; improper specification; misapplication;
misuse or other operating conditions outside of OMEGA’s
control. Components in which wear is not warranted, include but
are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its
various products. However, OMEGA neither assumes
responsibility for any omissions or errors nor assumes
liability for any damages that result from the use of its
products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by it will be as specified and
free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set
forth herein are exclusive, and the total liability of
OMEGA with respect to this order, whether based on
contract, warranty, negligence, indemnification, strict
liability or otherwise, shall not exceed the purchase price
of the component upon which liability is based. In no
event shall OMEGA be liable for consequential,
incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be
used, nor shall it be used: (1) as a “Basic Component” under 10
CFR 21 (NRC), used in or with any nuclear installation or activity;
or (2) in medical applications or used on humans. Should any
Product(s) be used in or with any nuclear installation or activity,
medical application, used on humans, or misused in any way,
OMEGA assumes no responsibility as set forth in our basic
WARRANTY /DISCLAIMER language, and, additionally,
purchaser will indemnify OMEGA and hold OMEGA harmless
from any liability or damage whatsoever arising out of the use
of the Product(s) in such a manner.
RETURN REQUESTS/ INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA
Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS). The assigned AR number should then
be marked on the outside of the return package and on any
correspondence.
The purchaser is responsible for shipping charges, freight,
insurance and proper packaging to prevent breakage in transit.
FOR WARRANTY
RETURNS,
please have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number under
which the product was
PURCHASED,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or
specific problems relative to
the product.
FOR NON-WARRANTY
REPAIRS,
consult OMEGA for
current repair charges. Have the
following information available
BEFORE contacting OMEGA:
1. Purchase Order number to
cover the COST of the repair,
2. Model and serial number of
the product, and
3. Repair instructions and/or
specific problems relative to
the product.
OMEGA’s policy is to make running changes, not model
changes, whenever an improvement is possible. This affords our
customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2004 OMEGA ENGINEERING, INC. All rights
reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or
machine-readable form, in whole or in part, without the prior
written consent of OMEGA ENGINEERING, INC.
Where Do I Find Everything I Need
for Process Measurement
and Control?
OMEGA…Of Course!
Shop online at omega.com
TEMPERATURE
Ⅺߜ
Thermocouple, RTD & Thermistor Probes,
Connectors, Panels & Assemblies
Ⅺߜ
Wire: Thermocouple, RTD & Thermistor
Ⅺߜ
Calibrators & Ice Point References
Ⅺߜ
Recorders, Controllers & Process Monitors
Ⅺߜ
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Ⅺߜ
Transducers & Strain Gages
Ⅺߜ
Load Cells & Pressure Gages
Ⅺߜ
Displacement Transducers
Ⅺߜ
Instrumentation & Accessories
FLOW/LEVEL
Ⅺߜ
Rotameters, Gas Mass Flowmeters & Flow
Computers
Ⅺߜ
Air Velocity Indicators
Ⅺߜ
Turbine/Paddlewheel Systems
Ⅺߜ
Totalizers & Batch Controllers
pH/CONDUCTIVITY
Ⅺߜ
pH Electrodes, Testers & Accessories
Ⅺߜ
Benchtop/Laboratory Meters
Ⅺߜ
Controllers, Calibrators, Simulators & Pumps
Ⅺߜ
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Ⅺߜ
Data Acquisition & Engineering Software
Ⅺߜ
Communications-Based Acquisition Systems
Ⅺߜ
Plug-in Cards for Apple, IBM & Compatibles
Ⅺߜ
Datalogging Systems
Ⅺߜ
Recorders, Printers & Plotters
HEATERS
Ⅺߜ
Heating Cable
Ⅺߜ
Cartridge & Strip Heaters
Ⅺߜ
Immersion & Band Heaters
Ⅺߜ
Flexible Heaters
Ⅺߜ
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺߜ
Metering & Control Instrumentation
Ⅺߜ
Refractometers
Ⅺߜ
Pumps & Tubing
Ⅺߜ
Air, Soil & Water Monitors
Ⅺߜ
Industrial Water & Wastewater Treatment
Ⅺߜ
pH, Conductivity & Dissolved Oxygen
Instruments
WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF