Filter
Top Products
F-11
F
Functions
Notes on LED light thermal cut-out
High to mid
Mid to low
Off
When the LED light is operating
at high power and the internal
temperature reaches a certain point,
the LED light output level falls to mid
power [ ] and the right lamp of the
LED light output level indicator lamps,
which indicates high power, begins to
flash slowly [ ]. If the temperature
rises further, the output level falls
to low power and the center lamp,
which indicates mid power, also
begins to flash.
If operation continues, the flash-ready
indicator starts to flash slowly and the
internal safety function turns the LED
light off. When this happens, allow
the SB-500 to cool down for a while
and then turn the power on again.
The LED light will not automatically
return to the same LED light output
level it was at before turning off.