Filter
Top Products
5
Series
Power controller unit for the Auto-focus type
The Auto-focus type includes a separate power controller that controls
illumination and zoom. In the repeat mode, the power unit automatically
recalls and sets the illumination and zoom magnification according to
settings created in the learn mode. This means automatic measuring for
batches of the same part can be performed with very high repeatability.
8-Step programmable power zoom lens (QS & QS-L* models)
The programmable power zoom lens provides zoom magnifications from 21X to 147X and
variable illumination intensity for tailoring your part measurement routines. Image gap and
pixel calibration take place automatically.
*QS-L1020AF is a fixed-magunification type.
0.5X
1.0X
2.0X
3.5X
200x100mm X,Y table
with linear scales
Examples of workpieces
QS-L1020ZAF
Optional objectives
The QS-E1020 and QS-L1020AF allow for
three different magnification settings (42X,
105X, and 210X) through the simple and
easy changing out of objectives.
02ALA400 1X objective
02ALA410 2.5X objective
02ALA420 5X objective