Filter
Top Products
5
SETTINGS AND PROCEDURES BEFORE
OPERATION
5.4 Wiring
5.4.2 Spring clamp terminal block
5 - 32
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTINGS AND
PROCEDURES BEFORE
OPERATION
6
TROUBLESHOOTINGAPPENDIX
(3) Applicable terminals and crimp tools
Table 5.10 shows applicable solderless terminals (bar terminals) and applicable crimp
tools.
* 1: When shielding wires, power supply cables of 2 mm
2
(AWG #14) or FG wires are crimped to bar
terminals using the CRIMPFOX UD6-4 or CRIMPFOX UD6-6, bar terminals may not be
connected to the terminal block depending on the cross-sectional shape after crimping.
* 2: When power supply cables of 2.5mm
2
(maximum applicable wire size) or FG wires are crimped to
bar terminals of 2.5 mm
2
, bar terminals may not be connected to the terminal block.
Table 5.10 Applicable solderless terminals (bar terminals) and crimp tools
Product Model
Maker Remarks
Bar type solderless
terminal
FA-VTC125T9
Mitsubishi Electric Engineering Co., Ltd.
For CC-Link dedicated cables
(0.3 to 1.65mm
2
)
Tool for bar type
solderless terminal
FA-NH65A -
Bar type solderless
terminal
TE0.5-10
NICHIFU Co., Ltd.
0.3 to 0.5mm
2
TE0.75-10
0.75mm
2
TE1.0-10
1.0mm
2
TE1.5-10
1.5mm
2
TE2.5-12
2.5mm
2 *2
Tool for bar type
solderless terminal
NH-79 -
Bar type solderless
terminal
AI0.5-10WH
Phoenix Contact Co., Ltd.
0.5mm
2
AI0.75-10GY
0.75mm
2
AI1-10RD
1.0mm
2
AI1.5-10BK
1.5mm
2
AI2.5-10BU
2.5mm
2
*2
Tool for bar type
solderless terminal
CRIMPFOX UD6 -
CRIMPFOX
UD6-4
*1
CRIMPFOX
UD6-6
*1
CRIMPFOX ZA3 -