Mitsubishi Electronics Q13UDVCPU Sleep Apnea Machine User Manual


 
80
4.2.2 Parameter settings
This section describes parameters required for the system configuration on Page 79, Section 4.2.1. Use a
programming tool to set parameters.
Settings of parameters in double-lined squares on Page 77, Section 4.2 (1) must be the same in all the CPU
modules in a multiple CPU system.
The necessity of parameters differs depending on the QCPU used. ( Page 77, Section 4.2 (1))
(1) Setting parameters (for the first time)
1. Set "Points Occupied by Empty Slot" in the "PLC System" window of PLC parameter.
Project window [Parameter] [PLC Parameter] [PLC System] "Points Occupied by
Empty Slot"
2. Set parameters for the multiple CPU system in the "Multiple CPU Setting" window of PLC
parameter.
Project window [Parameter] [PLC Parameter] [Multiple CPU Setting]
Item Description Default
Points Occupied by Empty Slot Set the number of points occupied by one empty slot. 16 points