Filter
Top Products
108
(a) Modules that can load output (Y) data
Data in the output (Y) can be loaded from the following modules mounted on the main base unit or extension
base unit.
(b) Modules that cannot load output (Y) data
Output data of empty slots and MELSECNET/H or CC-Link network remote stations controlled by other CPU
modules cannot be loaded. To use the output data in a CPU module other than the control CPU, perform auto
refresh using the CPU shared memory and send the output data of remote stations from the control CPU to
other CPU modules. ( Page 118, Section 6.1)
If the output loaded from other CPU modules is forcibly turned on/off in the host CPU module, the data will be set into the
specified forced on/off status. ( User's Manual (Function Explanation, Program Fundamentals) for the CPU module
used)
(2) When the "All CPUs Can Read All Outputs" checkbox is not checked
The on/off data of output modules and intelligent function modules controlled by other CPU modules cannot be
loaded. Data in the output (Y) remain at off.
Module type set
in PLC parameter ("I/O Assignment")
Mounted module
Blank
Output module
I/O combined module
Intelligent function module
Output
I/O Mix
Input module
Output module
I/O combined module
Intelligent Intelligent function module