Filter
Top Products
39
CHAPTER 3 SYSTEM CONFIGURATION
3
3.1 System Using Basic Model QCPU as CPU No.1
3.1.2 CPU module combinations and mounting positions
● When a Basic model QCPU is used, "PLC (Empty)" can be set between CPU modules. This is useful when adding a
Motion CPU to the system where a Basic model QCPU and a C Controller module or PC CPU module are used. No
program modification is required because the CPU number of the C Controller module or PC CPU module does not need
to be changed even after the new module is added.
● For a CPU module that occupies two slots or more, secure as many empty slots as needed for the module.