Filter
Top Products
18 19
18 19
• If the appliance or plug is
damaged, it must be inspected
and if necessary, repaired by
an authorised repair engineer,
otherwise there is a risk of
electric shock. Never try to
repair the appliance yourself.
Unauthorised repairs or
modications will invalidate
the guarantee. Please contact
the store where you bought
the appliance for repairs under
guarantee.
KEY TO MAIN COMPONENTS OF
THE APPLIANCE
1. Cord with plug
2. Hanging loop
3. Finger pad
4. Ceramic hot plates
5. Display
6. Setting buttons
7. On/Off button
USING THE APPLIANCE
1. Plug in and switch the power on.
2. Hold the on/off button (7) for
approx. 3 seconds, until the
display (5) shows "Lo" (low heat).
3. Set the desired temperature by
pressing the setting buttons (6).
o Temperature can range
between 100-200 ºC.
o Tip! If your hair is dyed,
bleached, very ne or
damaged, use a low
temperature setting.
4. The ceramic hot plates (4) will
heat to the set temperature
within 30 secs to 2 minutes.
The display will change after a
few second to show the actual
temperature to indicate when the
appliance is ready for use.
5. When setting or changing the
temperature, wait 10-20 seconds
while the appliance heats up or
cools down to the temperature
selected.
6. Use the appliance to set your
hair as desired.
7. Switch off by holding the on/off
button for approx. 3 seconds.
Remove the plug from the socket
once you have nished using
the appliance. Always allow it to
cool completely before you put it
away.
Styling tips
Brush hair thoroughly before
setting. Divide your hair up into
small sections, and deal with
them separately piece by piece as
described below until the desired
result is achieved. Hair should be
clean and dry before using the
appliance.