Filter
Top Products
8 6700-INS-LAB-RevC14
SETUP
WARNING: Before using the device, ensure that it has been cleaned as described in
MAINTENANCE/Cleaning the Nebulizer After Each Use.
1. Remove the top cover and nebulization chamber from the device.
2. Simultaneously press the button on each side of the air-flow chamber to remove
the air-flow chamber and medication cup from the device.
3. Fill the reservoir of the device with distilled water until it reaches exactly the
level marked in red (approximately 4 ml). This amount of water serves as a
liquid conductor, to conduct the ultrasound waves to the medication, and will
never be nebulized.
s NOTICE: The nebulizer will not operate if the chamber is not filled with water.