Filter
Top Products
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-13
NOTE: This device stores the last 90 measurements in memory. The data is
retained as long as the batteries are in the device. When you remove the
batteries or the batteries are drained, the data will be erased.
1. Press the MEMORY button.
2. The average data of all the measurements
and the number of measurements stored
are displayed.
Then, each time the MEMORY button
is pressed, the memory data is displayed
starting from the most recent. After
the last reading is displayed, the display
returns to the clock display.
3. To recall AM/PM readings, press:
MEMORY + AM button
Average of total AM measurements stored is displayed. Each time the AM
button is pressed, the memory data taken during the AM is displayed
starting from the most recent. After the last measurement is displayed, the
display returns to the clock display.
MEMORY + PM button
Average of total PM measurements stored is displayed. Each time the PM
button is pressed, the memory data taken during the PM is displayed
starting from the most recent. After the last measurement is displayed, the
display returns to the clock display.
If the MEMORY button is pressed again, the display returns to the average
data of all the measurements.
Clearing the memory data
4. Press and hold the MEMORY button until the “ ” (memory) mark
blinks to clear the stored data.
ABOUT MEMORY
Press the
MEMORY button
Averaged Systolic
Averaged Diastolic
Number of Readings
Average of all readings