Filter
Top Products
6 V/10 W incident lamp
• The 6 V/10 W lamp is an inclined incident source for
illuminating spatial objects
• By using two lamps, you can soften or eliminate shadows.
• At the nominal voltage (6 V), the color temperature is 2700 K.
̈ Release the clamping screw.
̈ Unfold the lampholder arm.
̈ Retighten the clamping screw.
̈ Use the screw to secure the clamp to
the side-faced column, either above or
below the focusing drive.
̈ Use the connector to attach the lamp-
holder arm to the clamp, on either the
right or the left.
̈ Fit the ∅ 25 mm adapter to the cast foot.
̈ Using the connector, attach the lampholder to the adapter.
̈ Remove the objective.
̈ Slide the adapter over the objective.
̈ Using the connector, attach the lampholder to the adapter.
̈ Unscrew a connector from the lampholder.
̈ Release the clamping screw.
̈ Using the thread, secure the lampholder to the focusing drive.
̈ Retighten the clamping screw.
̈ Attach the lamp to the connector on
the lampholder arm.
̈ Fit the filter holder, complete with KG1
heat-absorbing filter, to one of the pegs.
• A total of 4 filter holders with ∅ 50 mm
filters can be attached.
Assembly
Lampholder ➜
clamp for side-faced
columns
Lampholder ➜
cast foot
Lampholder ➜
objective
Lampholder ➜
inclinable focusing
drive
Lamp housing ➜
lampholder arm
40
Leica M Stereomicroscopes – Illuminations