Filter
Top Products
Leica M series Manual 24
Objective
Tools used
No tools required. ★
Preparation
1. Remove the protective cap on the optics
carrier by turning it.
Attaching the objective
Hold the objective firmly during assem-
bly and disassembly so that it does not
fall onto the stage plate. This applies particu-
larly to the 2× planapochromatic objective,
which is very heavy. Remove all specimens from
the stage plate first.
2. Screw the objective clockwise into the
optics carrier.
Alternative fastening options
If using the objective nosepiece, read the ★
instructions on page 25.
If using the AX carrier, read the instructions ★
on page 27.