Filter
Top Products
Kramer VSPM - Using the Kramer VSPM 11
11
If the physical ports are connected, the virtual port will automatically be
connected. If not, the virtual port will appear disconnected. To connect
the port, you will either need to edit the COM port (see
Section 4.3
5. In the same way, you can add additional virtual ports (for example, COM3):
),
delete the port and recreate it, or exit Kramer VSPM and re-enter it.
Figure 15: Adding the COM 3 Port
6. Click Add New:
Figure 16: COM 5 and COM 3 in the Virtual Serial Port List
i