Filter
Top Products
10 Kramer VSPM - Using the Kramer VSPM
3. Type the Destination IP number and the destination port (for the Kramer
FC-10ETH in the example illustrated in
Figure 1) in the appropriate text
boxes:
Figure 13: Adding the Destination IP and Port
You can check the Reconnect on connection lost box if you want the virtual
port to automatically reconnect to the destination port following a connection
loss.
4. Click the Add New button.
The new Virtual Port will be added to the Virtual Serial Port List:
Figure 14: Virtual Port COM5 Added to the Virtual Port List
The virtual serial port list shows if the port is currently connected, the
machine label and the COM port number.